How To Reprogram Schlage Code Lock. (for a new lock, use the default programming code—can be found on a sticker on the back of the keypad assembly). Homeowners that haven’t changed the original code should find it written in their installation guide or on the back side of the deadbolt.
Release it and wait until the lock resets itself and the light turns blue. So first how to reset schlage keypad lock? To check that the lock was reset, press the outside schlage button and enter one of the default user.
Table of Contents
Release The Outside Schlage Button.
(for a new lock, use the default programming code—can be found on a sticker on the back of the keypad assembly). The schlage button will remain illuminated to indicate the lock is ready for reprogramming. Press the “schlage” and then the “3” keys.
Under Things, Choose Add A Thing And Follow The Directions In The App.
2 can i take back my pin if i don’t save it right away? 1 how to reset your schlage keyless lock password; While holding the schlage button, reattach the battery terminal.
Press The Schlage Button Few Times And Then Hold It.
Using a screwdriver, remove the cover plate of the schlage lock, remove the battery. Slide off the battery cover. Press the schlage button.* 2.
Wait For The 'Schlage' Button To Flash Amber Or Orange And Beep Three Times.
Keep the schlage button pressed for at least 5 seconds. Enter a new (4 digit) user code and wait for the light indicator to illuminate orange three times and beep three times. How to change programming code on schlage lock.
How Do You Change The Code On A Schlage Lock?
Rotate the thumbturn away from the hinges. So first how to reset schlage keypad lock? After that, press number 6, then enter your programming code again as a confirmation of the removal of all of the codes.